csr_building_supplies

CSR Building Supplies

The largest drywall and finishing tool superstore in Canada 🇨🇦 #csrbuildingsupplies
Number 1 in selection and customer service
🏻🥇

Loading...
Check out the sweet looking display for the TapeTech Premium Workwear. Selling out fast, get yours today. Shop online at www.csrbuilding.ca
@tapetechtools 
#tapetech #drywallfinisher #taperlife #premiumworkwear

Check out the sweet looking display for the TapeTech Premium Workwear. Selling out fast, get yours today. Shop online at www.csrbuilding.ca @tapetechtools #tapetech #drywallfinisher #taperlife #premiumworkwear - 16 hours ago

44 Likes
3 Comments
1
Throwback Thursday! How old do you think this @canamtool compound tube is? A piston assembly was all the owner needed to get this tool up and running perfectly again. Made to last. #canamtools #tapingtools #compoundtube #drywalltools #drywallfinisher

Throwback Thursday! How old do you think this @canamtool compound tube is? A piston assembly was all the owner needed to get this tool up and running perfectly again. Made to last. #canamtools #tapingtools #compoundtube #drywalltools #drywallfinisher - 3 days ago

65 Likes
6 Comments
1
Loading...
Get the tool that’s sweeping the nation! Great tool even for entry level taping. Save time and apply tape cleaner. 
#Repost @delkotools with @get_repost
・・・
ZÜNDER 
#zunderstruck #drywalltaper #gesseiro #placo #trockenbau #zünder #plaquiste #drywall #rigips #gyproc #gips #knauf #sheetrock #drywallnation

Get the tool that’s sweeping the nation! Great tool even for entry level taping. Save time and apply tape cleaner. #Repost @delkotools with @get_repost ・・・ ZÜNDER #zunderstruck #drywalltaper #gesseiro #placo #trockenbau #zünder #plaquiste #drywall #rigips #gyproc #gips #knauf #sheetrock #drywallnation - 3 days ago

29 Likes
2 Comments
0
Genie Clips are now in stock and available online.

An innovative, affordable and reliable sound solution

GenieClip RST is engineered for superior acoustical performance in reducing the transmission of airborne and impact sound through wall and floor/ceiling assemblies.

GenieClip RST is a unibody molded rubber and galvanized steel part used to attach drywall to either wall or floor/ceiling assemblies. Made from recycled components, and engineered to allow reduction in assembly weight, the GenieClip RST contributes to LEED certified building.
#genieclip #soundengineering #soundclip

Genie Clips are now in stock and available online. An innovative, affordable and reliable sound solution GenieClip RST is engineered for superior acoustical performance in reducing the transmission of airborne and impact sound through wall and floor/ceiling assemblies. GenieClip RST is a unibody molded rubber and galvanized steel part used to attach drywall to either wall or floor/ceiling assemblies. Made from recycled components, and engineered to allow reduction in assembly weight, the GenieClip RST contributes to LEED certified building. #genieclip #soundengineering #soundclip - 4 days ago

44 Likes
1 Comments
1
New product alert! 🚨 
New TapeTech Premium workwear is now available for purchase online! Special pricing on now until September 4th.

#Repost @tapetechtools with @get_repost
・・・
Happy Monday! You don’t have to use ATF tools to get your job done this week but you DO have to wear pants... Check out the NEW TapeTech Premium Workwear available through any Authorized TapeTech Dealer.

New product alert! New TapeTech Premium workwear is now available for purchase online! Special pricing on now until September 4th. #Repost @tapetechtools with @get_repost ・・・ Happy Monday! You don’t have to use ATF tools to get your job done this week but you DO have to wear pants... Check out the NEW TapeTech Premium Workwear available through any Authorized TapeTech Dealer. - 11 days ago

90 Likes
4 Comments
1
Here’s an awesome deal to get the week started. The original super taper is now on sale until September 5th for $139.99! Use promo code: SUPERSAVE and save an additional 10% off! While supplies last.
#betterthanever #supertaper #tapepuller #bucketpuller

Here’s an awesome deal to get the week started. The original super taper is now on sale until September 5th for $139.99! Use promo code: SUPERSAVE and save an additional 10% off! While supplies last. #betterthanever #supertaper #tapepuller #bucketpuller - 12 days ago

65 Likes
3 Comments
0
#Repost @b.crenovations with @get_repost
・・・
Nothing beats going my favourite store @csr_building_supplies to buy my favourite brand of taping tools @columbiatools. Adding more weapons to my Arsenal 🤘🏽. Can’t wait to start using these! #cornercobra #columbiasander #5.5flatbox #7flatbox #csrbuildingsupplies #columbiatools

#bcrenovations #taper #drywallfinisher #drywallofinsta #mudlife #columbiaforlife

#Repost @b.crenovations with @get_repost ・・・ Nothing beats going my favourite store @csr_building_supplies to buy my favourite brand of taping tools @columbiatools. Adding more weapons to my Arsenal 🤘🏽. Can’t wait to start using these! #cornercobra #columbiasander #5 .5flatbox #7flatbox #csrbuildingsupplies #columbiatools #bcrenovations #taper #drywallfinisher #drywallofinsta #mudlife #columbiaforlife - 15 days ago

78 Likes
4 Comments
2
We made made sure this customer walked away happy. To fix this binding issue, we disassembled the taper head, changed all the head bushings and reassembled. The end result: 
#Repost @b.crenovations with @get_repost
・・・
My @columbiatools Automatic taper is running better than ever since I brought it to @csr_building_supplies and they worked their magic on it 🤘🏽. Ive only used the automatic taper under 10 times so I still got a lot of getting used to but like anything practice makes perfect! I will just keep getting better and faster! #bcrenovations  @drywall_of_insta 
#bestinvestment #columbiatools #automatictaper #csrbuildingsupplies #customhome #newconstruction #keepcraftalive #drywallofinsta #drywallfinisher #contractorsofinsta #instagood #instadaily #hgtvcanada #ontario #toronto #vaughan #mississauga #oakville #scarborough #milton

We made made sure this customer walked away happy. To fix this binding issue, we disassembled the taper head, changed all the head bushings and reassembled. The end result: #Repost @b.crenovations with @get_repost ・・・ My @columbiatools Automatic taper is running better than ever since I brought it to @csr_building_supplies and they worked their magic on it 🤘🏽. Ive only used the automatic taper under 10 times so I still got a lot of getting used to but like anything practice makes perfect! I will just keep getting better and faster! #bcrenovations @drywall_of_insta #bestinvestment #columbiatools #automatictaper #csrbuildingsupplies #customhome #newconstruction #keepcraftalive #drywallofinsta #drywallfinisher #contractorsofinsta #instagood #instadaily #hgtvcanada #ontario #toronto #vaughan #mississauga #oakville #scarborough #milton - 20 days ago

44 Likes
5 Comments
0
#Repost @toolaholic
・・・
I had quite a few people ask me what level 5 is, so we made this highlight clip to sum it up.
-
Level 5 is the 5th level of drywall finishing where the complete board surface is skimmed to provide the flattest and cleanest final product.
-
This is usually done in areas with harsh lighting to eliminate the look of joints and screws flashing through the paint, or if you are using glossy paint.
-
I chose to hand apply the mud because I was using the opportunity to float out a few waves in the wall, and correct the high shoulders in the board at the same time. Normally you can get away with rolling the mud on or spraying it.
-
Im using a Nela Mediflex trowel to apply and then I flatten it out using a @beroxpert 32” wide blade.
-
Ive mixed cgc machine mud up with roughly half a sponge of water per box, so its fairly thick. Im using a @columbiatools pump to speed up hawk refills.
-
Apply and remove. Its that straightforward. I overapply mud and use the Bero blade to straighten everything out.
-
Once sanded, it will be near perfect.
-
I picked up the Nela mediflex and Bero blades from @csr_building_supplies
-
#drywall #mud #level5 #drywalling #plaster #nelatrowels #trowel #beroexpert #skimcoat #plastering #smooth #remodel #titebond #toolaholic

#Repost @toolaholic ・・・ I had quite a few people ask me what level 5 is, so we made this highlight clip to sum it up. - Level 5 is the 5th level of drywall finishing where the complete board surface is skimmed to provide the flattest and cleanest final product. - This is usually done in areas with harsh lighting to eliminate the look of joints and screws flashing through the paint, or if you are using glossy paint. - I chose to hand apply the mud because I was using the opportunity to float out a few waves in the wall, and correct the high shoulders in the board at the same time. Normally you can get away with rolling the mud on or spraying it. - Im using a Nela Mediflex trowel to apply and then I flatten it out using a @beroxpert 32” wide blade. - Ive mixed cgc machine mud up with roughly half a sponge of water per box, so its fairly thick. Im using a @columbiatools pump to speed up hawk refills. - Apply and remove. Its that straightforward. I overapply mud and use the Bero blade to straighten everything out. - Once sanded, it will be near perfect. - I picked up the Nela mediflex and Bero blades from @csr_building_supplies - #drywall #mud #level5 #drywalling #plaster #nelatrowels #trowel #beroexpert #skimcoat #plastering #smooth #remodel #titebond #toolaholic - 30 days ago

252 Likes
15 Comments
0
Lights, lights, and more lights. Rechargeable LED flood lights available now. Up to 8 hours of running time from a full charge. Choose from 10w or 20w. Use promo INSTALIGHT and save 15% online only for a limited time. 👀 💡 💡 💡 
www.csrbuilding.ca

Lights, lights, and more lights. Rechargeable LED flood lights available now. Up to 8 hours of running time from a full charge. Choose from 10w or 20w. Use promo INSTALIGHT and save 15% online only for a limited time. www.csrbuilding.ca - 1 month ago

79 Likes
6 Comments
0
Looking for Aria Vents? We stock:
Drywall Pro
Drywall Pro Air Return 
The Aria OG Collection
Flushmount Pro 
Pick up yours today.
@ariavent 
#aria #ariavent #drywallpro #ariaog #flushmoutpro #drywallers #tilers #contractors #diyers #vents

Looking for Aria Vents? We stock: Drywall Pro Drywall Pro Air Return The Aria OG Collection Flushmount Pro Pick up yours today. @ariavent #aria #ariavent #drywallpro #ariaog #flushmoutpro #drywallers #tilers #contractors #diyers #vents - 1 month ago

78 Likes
6 Comments
1
New Parfaitliss Smoothing Kits now in stock!
This kit contains:
10”, 14”, 18”, 24”, 32”, 40”, and extension pole.

item code #80428 
product of France 🇫🇷 Available in store and online now.

New Parfaitliss Smoothing Kits now in stock! This kit contains: 10”, 14”, 18”, 24”, 32”, 40”, and extension pole. item code #80428 product of France Available in store and online now. - 1 month ago

97 Likes
2 Comments
0
Now stocking @stabilausacanada Lasers, Levels, and Tape Measures. Also available online. Check it out 👉🏻www.csrbuilding.ca 
#stabila #stabilalevels #tapemeasure #lasers #lax50g #lax300g

Now stocking @stabilausacanada Lasers, Levels, and Tape Measures. Also available online. Check it out 🏻www.csrbuilding.ca #stabila #stabilalevels #tapemeasure #lasers #lax50g #lax300g - 2 months ago

98 Likes
2 Comments
1
Stiletto Titanium Drywall Hatchets / Axes in stock. Limited time only: $128 for 10oz Square Hatchet and $139 for 9oz Round Drywall Axe.
#stiletto #drywall #drywallers #drywallaxe #lathersaxe #drywalltools

Stiletto Titanium Drywall Hatchets / Axes in stock. Limited time only: $128 for 10oz Square Hatchet and $139 for 9oz Round Drywall Axe. #stiletto #drywall #drywallers #drywallaxe #lathersaxe #drywalltools - 2 months ago

135 Likes
4 Comments
1
Now available online! Special introductory price. Check it out csrbuilding.ca

Sanding day with @columbiatools
#csrbuildingsupplies #columbiatapingtools #tapingtools #sanding #sandingday

Now available online! Special introductory price. Check it out csrbuilding.ca Sanding day with @columbiatools #csrbuildingsupplies #columbiatapingtools #tapingtools #sanding #sandingday - 2 months ago

147 Likes
18 Comments
1
Congratulations on our 5K Giveaway winner Nathaniel Medina @capistrano_drywall from South Orange County, California! We hope you’ll put these @canamtool set to good use. Please DM us your shipping details.

A big thank you to all those who entered and for your continued support! 
#csrbuildingsupplies #5k #giveaway

Congratulations on our 5K Giveaway winner Nathaniel Medina @capistrano_drywall from South Orange County, California! We hope you’ll put these @canamtool set to good use. Please DM us your shipping details. A big thank you to all those who entered and for your continued support! #csrbuildingsupplies #5k #giveaway - 2 months ago

64 Likes
5 Comments
2
This is from our tour of Nela in Germany this spring.

Super impressed with the attention to detail.

#csrbuildingsupplies
#carbuilding.ca

This is from our tour of Nela in Germany this spring. Super impressed with the attention to detail. #csrbuildingsupplies #carbuilding .ca - 2 months ago

81 Likes
2 Comments
0
Phil from @prctaping demonstrating just how much faster and easier it is using a collated screw system.

Items featured and available at CSR:
Grip-Rrite Collated Drywall Screws (Coarse/Fine) 1 1/4” on sale $10.99 per 1000, SuperDrive N7 Series attachment tool (SDN7), and @trimtex_drywall Buttboard!

#Repost @prctaping with @get_repost
・・・
First impressions of the Grabber SuperDrive N7 Collated Attachment - 
So far I'm impressed with the build quality and how easy the attachment is to use.. I don't drywall everyday so this may be a perfect setup for me. 
I used buttboard in this video if you are wondering why I lined up my butt joints 🤘🏻 Fully detailed video of the attachment tomorrow 💯 .
.
.
.
@toolaholic @toolsbydesign @trimtex_drywall @kingsgateconstruction 
#punkrocktaper #prctaping #drywallnation #drywall #drywalltaper #taper #columbiatapingtools #cgc #trimtex #sheetrock #finisher #construction #interior #interiordesign #work #workflow #instadaily #instagood #hawkandknife #contractorsofinsta #ontario #canada #clean #gypsum #drywalllife #keepcraftalive #krugerconstruction

Phil from @prctaping demonstrating just how much faster and easier it is using a collated screw system. Items featured and available at CSR: Grip-Rrite Collated Drywall Screws (Coarse/Fine) 1 1/4” on sale $10.99 per 1000, SuperDrive N7 Series attachment tool (SDN7), and @trimtex_drywall Buttboard! #Repost @prctaping with @get_repost ・・・ First impressions of the Grabber SuperDrive N7 Collated Attachment - So far I'm impressed with the build quality and how easy the attachment is to use.. I don't drywall everyday so this may be a perfect setup for me. I used buttboard in this video if you are wondering why I lined up my butt joints 🤘🏻 Fully detailed video of the attachment tomorrow . . . . @toolaholic @toolsbydesign @trimtex_drywall @kingsgateconstruction #punkrocktaper #prctaping #drywallnation #drywall #drywalltaper #taper #columbiatapingtools #cgc #trimtex #sheetrock #finisher #construction #interior #interiordesign #work #workflow #instadaily #instagood #hawkandknife #contractorsofinsta #ontario #canada #clean #gypsum #drywalllife #keepcraftalive #krugerconstruction - 2 months ago

144 Likes
9 Comments
0
Loading...
Load more posts
2017 - © Deskgram. All rights reserved.